|Black Lake Auto Inc (aka Bill's AutoPartsRecycler) warrants to their original buyers that each used item sold is protected from defects in material and workmanship when properly installed and under normal use and service for the period of time to the terms and conditions as following unless otherwise noted:
1-1. Black Lake Auto Inc, at its option, can either chose to repair or replace the defective unit only.
Used Engines: Thirty days on parts only from the date of delivery. No warranty is covered on any attached accessories and parts such as manifolds, carburetor, distributor, alternator, starter, water pump, thermostat, clutch, flywheel, timing belt of belt-driving engine, and all seals etc
1-2. No warranty is offered on Mazda rotary, high performance and racing engines or transmissions.
1-3. Used Transmissions: Thirty days from the date of delivery on parts only. Electrical switches, wiring system, shifting linkage, and torque converter are not guaranteed.
1-4. Due to the materials and composition of power-train (engine, transmission, transfer case) components, we do not warranty against surface rust that may accrue over time, as long as it does not affect the overall performance of the product sold. There is reasonable expectation that surface rust will form no matter if the product is stored on a shelf or left in the donor vehicle until the time of sale.
2. Customer Obligations:
2-1. Customer should install new oil, oil filter, thermostat, spark plugs, coolant, and tune up parts.
2-2. Customer should inspect and replace as necessary water hoses, water pump, and all seals and gaskets before installation.
2-3. Due to the variations and design on some models of Japanese version engines, customer should make necessary changes on some parts such as change oil pan and oil pick up tube, dipstick, fly wheel, clutch assembly, distributor, etc.
2-4. All belt-driving engines should have a new timing belt installed and set to the right timing before installation is done. See limitation (3-4)
2-5. Check and adjust valve clearance and tune up.
2-6. Customer is responsible to verify parts for fitness, proper size and application prior to installation. We assume no liability for parts incorrectly installed as the result of errors in ordering, packing, and shipping.
2-7. Warranty claims must be approved by a representative from Black Lake Auto Inc before the product can be returned. Customer agrees to return product in the same condition and assembly as it was delivered.
This warranty shall not apply to or include any of the following:
3-1. Repair or replacement as a result of any accident, misuse, collision, upset, fire, negligence, alteration, racing events, improper installation or repair.
3-2. Labor cost, downtime, towing charges, freight charges, rental and comprehensive insurance claims etc.
3-3. Oil leaks, blown head gasket and overheating due to poor cooling system.
3-4. Bend valves, lock up or back fire due to broken timing belt or wrong timing set. New timing should be installed on all belt-driving engines before installation.
3-5. Internal damage caused by dropping obstacles into combustion chambers.
The internal components of the long block assembly that are covered are the pistons, piston rings, piston pins, crankshaft and main bearings, connecting rods and rod bearings, camshaft and camshaft bearings, timing chain and timing gears, intake and exhaust valves, valve springs, oil pump, push rods, rocker arms, hydraulic lifters, and rocker arm shafts. The engine block and cylinder heads are only covered if damaged by a part listed above.
In the event the customer cancels the order after the product has shipped, the customer will be liable for all shipping charges and a 20% en-route cancellation fee. Any damages to the delivered product must be reported within 24 hours so that any necessary actions may be started/filed ie: claim with the freight company or request for return.